Vickers DG4V Directional Control Valve

Vickers DG4V Directional Control Valve models are direct solenoid operated four-way directional control valves. Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now. This, in turn, would determine the direction of movement of a fluid cylinder, or the direction of rotation of a fluid motor.
1. Totally interchangeable with Rexroth and Yuken
2. Widely used for various hydraulic systems
3. Max. operating pressure up to 350 bar(5076psi)
4. Max. flow 80L/min( 21 US gpm)=60 L/min (15.8 US gpm)-AC
5. Direct operated directional spool valve with solenoid actuation in high perfomance version
6. Porting pattern to DIN 24340 form A (without locating bore)
7. Porting pattern to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2 D03 (with locating bore)
8. Wet-pin DC or AC voltage solenoids with demountable coil
9. Solenoid coil can be rotated 900
10. The coil can be changed without open the the pressure-tight chamber
11. Electrical connection as individual or central connection
12. Manual override, optional
13. Very competitive price
14. 1 year of warranty
15. Fast delivery time

Vickers Directional Valve

Vickers Directional Valve can directly control the flow on-off and change. It also can be used as the pilot-operated valve,which could operate other valves. Vickers Solenoid Valves Operating Dependent on the application and the system filtration, any sliding spool valve if held shifted under pressure for long periods of time, may stick and not move readily due to fluid residue formation.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.

Vickers Hydraulics Valves

Vickers Hydraulics Valves easily mountable on industry standard surfaces,  Vickers Hydraulics Valves provide three- or four-way directional control for cylinder or hydraulic motors.  Vickers Hydraulics Valves , regardless of manufacturer, will operate with fluids showing a higher cleanliness code. The operating life of the control, and other components in the system, will be less however.  For maximum life and best system performance, cleanliness codes as defined below should be achieved. Fluids other than petroleum, severe service cycles or temperature extremes are cause for adjustment of these cleanliness codes.  DG4V Vickers Directional Control Valve models are direct solenoid operated four-way directional control valves. Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now. This, in turn, would determine the direction of movement of a fluid cylinder, or the direction of rotation of a fluid motor.

Vickers Hydraulics Valves

Vickers Hydraulics Valves shown in this catalog are designed to provide a controlled oil flow to a command signal,Wet armature solenoid operated Vickers Hydraulics Valves,Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now.
1. Very competitive price
 2. 1 year of warranty
 3. Widely used for various hydraulic systems
 4. Max. operating pressure up to 350 bar(5076psi)
 5. Direct operated directional spool valve with solenoid actuation in high perfomance version
 6. Porting pattern to DIN 24340 form A (without locating bore)
 7. Porting pattern to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2 D03 (with locating bore)
 8. Wet-pin DC or AC voltage solenoids with demountable coil
 9. Solenoid coil can be rotated 900
 10. The coil can be changed without open the the pressure-tight chamber
 11. Electrical connection as individual or central connection

Vickers Hydraulics Directional Valves

Vickers Hydraulics Directional Valves are the most universally applied products for controlling the stop, start and direction of fluid flow in a circuit. Vickers Hydraulics Directional Valves are a fundamental part in hydraulic machinery. These hydraulic valves direct fluid through different paths from one or multiple sources and can be either mechanically or electrically controlled. The movement of the spool inside of these valves restricts or permits the flow of fluid across the circuit.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.
5. Multi-fluid capability without need to change seals.
6. Higher sustained machine productivity and higher uptime because of proven fatigue life and endurance, tested over.
7. Solenoid coils can be changed quickly and easily without leakage from hydraulic system.
8. Compact, cost effective system design when used with Vickers Directional Control Valves and subplates.