Vickers DG4V Directional Control Valve

Vickers DG4V Directional Control Valve models are direct solenoid operated four-way directional control valves. Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now. This, in turn, would determine the direction of movement of a fluid cylinder, or the direction of rotation of a fluid motor.
1. Totally interchangeable with Rexroth and Yuken
2. Widely used for various hydraulic systems
3. Max. operating pressure up to 350 bar(5076psi)
4. Max. flow 80L/min( 21 US gpm)=60 L/min (15.8 US gpm)-AC
5. Direct operated directional spool valve with solenoid actuation in high perfomance version
6. Porting pattern to DIN 24340 form A (without locating bore)
7. Porting pattern to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2 D03 (with locating bore)
8. Wet-pin DC or AC voltage solenoids with demountable coil
9. Solenoid coil can be rotated 900
10. The coil can be changed without open the the pressure-tight chamber
11. Electrical connection as individual or central connection
12. Manual override, optional
13. Very competitive price
14. 1 year of warranty
15. Fast delivery time

Vickers Directional Valve

Vickers Directional Valve can directly control the flow on-off and change. It also can be used as the pilot-operated valve,which could operate other valves. Vickers Solenoid Valves Operating Dependent on the application and the system filtration, any sliding spool valve if held shifted under pressure for long periods of time, may stick and not move readily due to fluid residue formation.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.

Vickers Hydraulics Valves

Vickers Hydraulics Valves easily mountable on industry standard surfaces,  Vickers Hydraulics Valves provide three- or four-way directional control for cylinder or hydraulic motors.  Vickers Hydraulics Valves , regardless of manufacturer, will operate with fluids showing a higher cleanliness code. The operating life of the control, and other components in the system, will be less however.  For maximum life and best system performance, cleanliness codes as defined below should be achieved. Fluids other than petroleum, severe service cycles or temperature extremes are cause for adjustment of these cleanliness codes.  DG4V Vickers Directional Control Valve models are direct solenoid operated four-way directional control valves. Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now. This, in turn, would determine the direction of movement of a fluid cylinder, or the direction of rotation of a fluid motor.

Vickers Hydraulics Valves

Vickers Hydraulics Valves shown in this catalog are designed to provide a controlled oil flow to a command signal,Wet armature solenoid operated Vickers Hydraulics Valves,Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now.
1. Very competitive price
 2. 1 year of warranty
 3. Widely used for various hydraulic systems
 4. Max. operating pressure up to 350 bar(5076psi)
 5. Direct operated directional spool valve with solenoid actuation in high perfomance version
 6. Porting pattern to DIN 24340 form A (without locating bore)
 7. Porting pattern to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2 D03 (with locating bore)
 8. Wet-pin DC or AC voltage solenoids with demountable coil
 9. Solenoid coil can be rotated 900
 10. The coil can be changed without open the the pressure-tight chamber
 11. Electrical connection as individual or central connection

Vickers Hydraulics Directional Valves

Vickers Hydraulics Directional Valves are the most universally applied products for controlling the stop, start and direction of fluid flow in a circuit. Vickers Hydraulics Directional Valves are a fundamental part in hydraulic machinery. These hydraulic valves direct fluid through different paths from one or multiple sources and can be either mechanically or electrically controlled. The movement of the spool inside of these valves restricts or permits the flow of fluid across the circuit.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.
5. Multi-fluid capability without need to change seals.
6. Higher sustained machine productivity and higher uptime because of proven fatigue life and endurance, tested over.
7. Solenoid coils can be changed quickly and easily without leakage from hydraulic system.
8. Compact, cost effective system design when used with Vickers Directional Control Valves and subplates.

Vickers Hydraulics Valves

Vickers Hydraulics Valves give our customers a competitive advantage in markets all over the world. Delivering unmatched quality across a wide range of options, our high-value valve products feature all the characteristics and performance levels of true industry leaders.  Vickers Hydraulics Valves , regardless of manufacturer, will operate with fluids showing a higher cleanliness code.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.
5. Multi-fluid capability without need to change seals.
6. Higher sustained machine productivity and higher uptime because of proven fatigue life and endurance, tested over.
7. Solenoid coils can be changed quickly and easily without leakage from hydraulic system.
8. Compact, cost effective system design when used with Vickers Directional Control Valves and subplates.

Vickers Directional Valves

Vickers Directional Valves provide precision directional control for any hydraulic system and can be subplate or manifold mounted.  Vickers Directional Valves allow for precise flow in one direction and free flow in the opposite direction. Settings are easily adjustable and color coded for quick reference. Inline valves have the required ports machined in the body and connect to the system with hose or tubing. Vickers Hydraulics Valves can perform a variety of functions to operate a system properly. Applied offers a wide range of hydraulic valves from industry leading suppliers. From directional control valves to hydraulic ball valves to cartridge valves, we provide the hands on expertise and local inventory you need to keep your operation running smoothly.

Vickers Control Valves

Vickers Control Valves, regardless of manufacturer, will operate with fluids showing a higher cleanliness code. The operating life of the control, and other components in the system, will be less however.  For maximum life and best system performance, cleanliness codes as defined below should be achieved. Fluids other than petroleum, severe service cycles or temperature extremes are cause for adjustment of these cleanliness codes. Spool Type Closed, Spring Centered
Connection ：DIN 43650
Coil Volts： 24VDC
GPM @ 3000 PSI：16
Max. Pressure (PSI)：5075
Max. Tank Pressure (PSI)：3045
Seal Type ：Fluorocarbon
Length (In.)：8.6
Width (In.)：2
Height (In.)：3.6
Series ：DG4V
Standards： ISO 4401-03

DG4V Vickers Directional Control Valve

DG4V Vickers Directional Control Valve models are direct solenoid operated four-way directional control valves.  Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now. This, in turn, would determine the direction of movement of a fluid cylinder, or the direction of rotation of a fluid motor.

DG4V Vickers Hydraulics Valve

DG4V Vickers Hydraulics Valve models are direct solenoid operated four-way directional control valves. Vickers Hydraulics Valves primary function in a hydraulic circuit is to direct fluid now. This, in turn, would determine the direction of movement of a fluid cylinder, or the direction of rotation of a fluid motor.

Vickers Solenoid Operated Directional Valves

Vickers Solenoid Operated Directional Valves can directly control the flow on-off and change. It also can be used as the pilot-operated valve,which could operate other valves. Vickers Hydraulic Valve are for directing and stopping flow at any point in a hydraulic system.

Vickers DG4V Solenoid Valves

Any Vickers DG4V Solenoid Valves, if held shifted under pressure for long periods, may stick and not spring return, due to silting. Therefore, it is recommended that the Vickers Directional Valves be cycled periodically to prevent this from occurring. Only DC coil voltages are available. For applications where the junction box is required, valves with F (flying lead) type coils must be driven by a DC electrical signal.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and        locations.
5. Multi-fluid capability without need to change seals.
6. Higher sustained machine productivity and higher uptime because of proven fatigue life and endurance,    tested over.
7. Solenoid coils can be changed quickly and easily without leakage from hydraulic system.

8. Compact, cost effective system design when used with Vickers System Stak valves and subplates. 

Vickers Dg4v Directional Control Valves

Vickers Dg4v Directional Control Valves use solenoid to pull the spool and change the direction of the hydraulic oil. Vickers Dg4v Directional Control Valves can directly control the flow on-off and change. It also can be used as the pilot-operated valve,which could operate other valves. Vickers Dg4v Directional Control Valves are for directing and stopping flow at any point in a hydraulic system.
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.

Vickers Hydraulics Valves

Vickers Hydraulics Valves 4 Way Valve, 5075 psi Maximum Pressure, Closed Spool Type, 110-120VAC, 21 gpm Flow Rate
Same function as Vickers Hydraulics Valves
High quality
Good service and price
DG4V Valves Operating considerations
1. Dependent on the application and the system filtration, any sliding spool valve if held
shifted under pressure for long periods of time, may stick and not move readily due to fluid residue formation. It may therefore need to be cycled periodically to prevent this from happening.
2. Surges of fluid in a common tank line serving two or more valves can be of sufficient magnitude to cause inadvertent shifting of these valves. This is particularly critical in no-spring detented models, separate drain lines are necessary.

DG4V-3-B/F Valves

DG4V-3-B/F Valves Product Description
141515 New-No Box,DG4V-3-B/F Valves, 3000PSI, 3 Position Spring Centered, Part Numbers on Assembly as Follows:  Pilot Valve, DG4V-3-60-VM-U-B5-60, Coil: 02-101726; Coil 110/120VAC 60HZ, Coil P/N 02-101726. Item is New, unused, no factory packaging. Austin Surplus SKU: 141515 Location: GRG-R15-P14-S02-0032095
1. Efficient control of greater hydraulic powers without increasing solenoid power consumption.
2. Installed cost and space savings from higher power/weight-and-size ratios.
3. Increases system efficiency; the result of improved manufacture of spools and bores.
4. Installation flexibility resulting from choice of numerous combinations of solenoid connectors and locations.
5. Multi-fluid capability without need to change seals.
6. Higher sustained machine productivity and higher uptime because of proven fatigue life and endurance, tested over.
7. Solenoid coils can be changed quickly and easily without leakage from hydraulic system.
8. Compact, cost effective system design when used with Vickers Directional Control Valves and subplates.

DG4V Directional Valves

DG4V Valves, regardless of manufacturer, will operate with fluids showing a higher cleanliness code. The operating life of the control, and other components in the system, will be less however.  For maximum life and best system performance, cleanliness codes as defined below should be achieved. Fluids other than petroleum, severe service cycles or temperature extremes are cause for adjustment of these cleanliness codes. Spool Type Closed, Spring Centered
Connection ：DIN 43650
Coil Volts： 24VDC
GPM @ 3000 PSI：16
Max. Pressure (PSI)：5075
Max. Tank Pressure (PSI)：3045
Seal Type ：Fluorocarbon
Length (In.)：8.6
Width (In.)：2
Height (In.)：3.6
Series ：DG4V
Standards： ISO 4401-03

DG4V Valves

DG4V Valves Product Description
Maximum recommended flow data is for 90% nominal voltage in a 4–way circuit with cylinder ports either looped or blocked and containing 2,5 liters (.66 USgal) compressed volume. Reduced performance may result when certain spools are used in 3–way circuits. Flow rates are based on warm solenoids operating at minimum rated voltage (i.e. 90% of rating), standard 0.8 mm orifice and 38C  (100  F) oil temperature.
Double solenoid valves,two position, detented